Tube Heat Exchanger Product List and Ranking from 29 Manufacturers, Suppliers and Companies

High-efficiency fin tube heat exchanger "LS Fin"

It is suitable for heating and cooling during the processing of industrial products.

The "LS Fin" is a type of heat transfer tube that has heat dissipation fins wrapped in a spiral using a special crimping method at an angle. It has a larger contact area compared to conventional fin tubes, allowing for a high thermal conductivity and enabling a compact design. Low static pressure blowers can also be used, making it possible to create a cost-effective overall system. As we specialize in custom orders, we can manufacture products according to the user's specifications for dimensions and capacity in a short lead time and at a low price. 【Features】 ■ Larger contact area than conventional fin tubes ■ Excellent adhesion ■ High thermal conductivity ■ Compact design possible ■ Supports short lead times and small lots *For more details, please refer to the PDF document or feel free to contact us.

Company：勝川熱工営業部・工場
Price：Other

Other machine elements
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Selection of LS Fin Heater Plate Fin / Erofin

We will provide the optimal design according to specifications and usage!

The LS fin heater is a heater made using the LS fin tube, which has been developed as a next-generation fin tube to replace the elofin heater used for dryers. It addresses the issues associated with heaters that use aluminum elofin tubes, which have durability problems. This allows for a reduction in total costs, including heater price, weight, and fan static pressure. 【Features】 ○ When adopted in a circulation drying furnace (dryer), it can fit into about half the heat transfer area compared to elofin type. 　→ If two elofin heaters were previously needed, one unit can now meet the required capacity. ○ Total costs can be reduced, including heater price, weight, and fan static pressure. ○ It can be installed as a replacement when updating from existing elofin heaters. For more details, please contact us or download the catalog.

Company：勝川熱工営業部・工場
Price：Other

Heat exchanger
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Design and Manufacturing of Heat Exchangers" *Presentation of basic knowledge explanation materials

We manufacture low-cost, space-saving heat exchangers. We propose suitable heat transfer media, shapes, and materials for your applications.

Katsukawa Thermal Engineering has 86 years of history and experience in the design and manufacturing of heat exchangers that support the cooling and heating of production lines. We propose combinations, shapes, and materials of heat transfer media suitable for various applications such as metals, machinery, textiles, chemicals, ceramics, food, and paper & pulp. We can accommodate various types of heat exchangers, including finned tube, plate, and shell & tube types. We respond to our customers' needs by creating low-cost, space-saving, and high-quality products. Please feel free to contact us. *In addition to our company brochure, we are currently offering materials that explain the basics of heat exchangers. You can view them via "PDF Download."

Company：勝川熱工営業部・工場
Price：Other

Heat exchanger
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Heat exchangers for heating and cooling for semiconductor manufacturing equipment manufacturers.

【Short delivery time OK】Many achievements in coating and drying equipment. Low cost and space-saving solutions are possible. We have a solid system in place for sudden repair requests, ensuring peace of mind. *Basic knowledge materials are currently being distributed.

At Katsukawa Thermal Engineering, we design and manufacture "heat exchangers" necessary for heating, cooling, and dehumidifying in the production processes of industrial products. To create structures suitable for various industries, taking into account applications and usage environments, a wealth of experience is required. Our company offers our long-standing experience and achievements as an asset to meet our customers' needs. We have two factory facilities in place, ensuring a robust system for sudden repair requests. We can achieve low-cost and space-saving solutions with appropriate heat media, shapes, and materials for various applications. Please feel free to contact us regarding drying, cooling, dehumidifying, and heat recovery. [Examples of Applications] Coating and drying equipment related to chemical fibers, films, flat displays, lithium-ion batteries, etc. *In addition to our company brochure, we are currently providing materials that explain the basics of heat exchangers. You can view them immediately via "PDF Download."

Company：勝川熱工営業部・工場
Price：Other

Heat exchanger
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Carbon Graphite Heat Exchanger - Shell and Tube Type

High-performance carbon heat exchangers compatible with international design standards for evaporators and condensers!

The "shell-and-tube type heat exchanger" is a carbon heat exchanger with a complete floating tube sheet structure manufactured by Graphite India Ltd. There is no leakage between the shell side and the tube side. Both vertical and horizontal types can be produced. Custom products are also available, so please feel free to consult us. 【Features】 ■ Complete floating tube sheet structure ■ The tube bundle is completely removable ■ Channel covers can be selected from steel, graphite, FRP, Teflon lining, or glass lining ■ Unique design by GI for impact plates and steam chests *For more details, please refer to the PDF materials or feel free to contact us.

Company：カンセツ産業
Price：Other

Heat exchanger
tube
others
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

KJ tube-type heat exchanger

Zero leak structure - a design that is resistant to dust adhesion! Expansion mechanism that absorbs thermal expansion.

We would like to introduce the "KJ Tube-type Heat Exchanger" handled by Kajihara Iron Works Co., Ltd. It features a wave-shaped tube that offers high heat exchange efficiency. It can utilize high heat-resistant materials (Inconel, Hastelloy) and suppresses cracking due to radiant heat. Additionally, it has a zero-leak structure and is designed to be resistant to dust accumulation. It can also be used for recovering waste heat and hot air. 【Features】 ■ Adoption of wave-shaped tubes for high heat exchange efficiency ■ Compatible with high heat-resistant materials (Inconel, Hastelloy) ■ Suppresses cracking due to radiant heat ■ Zero-leak structure ■ Dust-resistant design *For more details, please refer to the PDF document or feel free to contact us.

Company：梶原鉄工所
Price：Other

Heat exchanger
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fin tube type heat exchanger unit heater H type

Achieves comfortable heating as a warm air heating system for buildings with a large floor area and high ceilings.

Unit heaters provide comfortable heating as warm air heating systems for buildings with large floor areas and high ceilings, such as factories, warehouses, and markets. Additionally, they are designed to easily adjust the air discharge direction vertically to appropriately circulate air according to the facility's conditions. With hanging rings attached to the casing, they can be mounted on ceilings or walls, achieving space-saving solutions. For more details, please contact us or refer to the catalog.

Company：井上ヒーター
Price：Other

Heat exchanger
Other heaters
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fin Tube Heat Exchanger General Catalog

[Comprehensive catalog available] Featuring many items including fin tube heat exchangers!

In the "Heat Exchanger Comprehensive Catalog" of Inoue Heater Co., Ltd., various products are featured, including the "plate fin," which can be considered the heart of the heat exchanger, line heaters (coolers), high-pressure gas-compatible tank-type heaters (coolers), and heat (cool) air generation devices, referred to as "various heaters (coolers)." Additionally, "Elofin tubes" can be manufactured to the desired specifications for pipe diameter, length, coil width, and pitch. The "Unit Heater H Type" is also included, which provides comfortable heating as a warm air heating system for large floor area buildings with high ceilings, such as factories, warehouses, and markets. *For more details, please download the catalog or contact us!*

Company：井上ヒーター
Price：Other

Heat exchanger
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Technical Data] Maximum Efficiency in Minimal Space: "Fin Tube Heat Exchanger"

This is a technical document that explains everything about fin tube heat exchangers, including their principles and advantages!

The "fin tube heat exchanger" is a valuable technical document for selection that cannot be overlooked when introducing or replacing coolers and heaters in manufacturing processes, including drying and cooling processes. 【Contents】 ■ What is a fin tube heat exchanger? ■ Principles: Principles of heaters and coolers ■ Advantages: Differences between multi-tube heat exchangers and fin tube heat exchangers ■ Application examples: Drying processes in painting lines, solvent cleaning, painting lines ■ Setting the surrounding environment: Points to consider during introduction * Please refer to the PDF data of the technical document on "fin tube heat exchangers" available for download.

Company：井上ヒーター
Price：Other

Heat exchanger
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Customization Example] Header Connection Elfin Tube

Elfin tube connected with a header.

【Customization】 We have connected a header to the aerofin tube. Inoue Heater Co., Ltd. manufactures customized heaters and coolers tailored to your requests, in addition to standard products. *For more details, please download the comprehensive catalog or contact us directly.*

Company：井上ヒーター
Price：Other

Heat exchanger
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shell and tube heat exchanger

We will propose the heat exchanger that best meets your needs!

A shell and tube heat exchanger consists of a shell (cylindrical body) with numerous tubes (heat transfer pipes) arranged inside, allowing heat exchange by flowing fluids with different temperatures on the shell side and the tube side. It can be adapted for all applications, including heating, cooling, evaporation, and condensation, regardless of low or high temperatures.

Company：境川工業
Price：Other

air conditioning
Heating device
Heat exchanger
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Stainless Steel Fin Tube Heat Exchanger *Video Available

Improved heat transfer efficiency with a unique fin shape! A compact and low-cost stainless steel fin tube heat exchanger! Also available for cold climate specifications.

The "stainless steel fin tube heat exchanger" excels in corrosion resistance, heat resistance, and strength, offering a long lifespan and easy maintenance. Additionally, through collaboration between industry and academia, we have successfully improved the adhesion of the fins, enhancing performance. There are cases where the introduction of this heat exchanger has resolved issues related to corrosion of copper and steel pipes due to water quality impacts, as well as lifespan problems in corrosive environments. It is also suitable for clean usage environments. 【Features】 ■ Function: Dehumidification, solvent recovery, corrosion prevention against corrosive gases and water quality ■ Heat media: Flash steam, saturated water, pure water, well water, industrial water, etc. ■ Element materials - Tubes: Stainless steel pipes (SUS304, SUS316, SUS316L) - Fins: Stainless steel fins (SUS304, SUS316, SUS316L) Other materials are available upon consultation. The "rapid filling hydrogen storage alloy tank" from Sakai River Industries Co., Ltd. has been selected for the "Kansai Manufacturing New Selection 2025" by the Kinki Bureau of Economy, Trade and Industry in the carbon-neutral society realization (GX) category. *You can view a catalog introducing our heat exchangers by downloading the PDF. Please feel free to contact us for inquiries.

Company：境川工業
Price：Other

Heating device
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Possible from small units under 1m² to about 300m² - "Heat Exchanger"

We provide a consistent process from tank manufacturing to the production of shell and tube heat exchangers. Replacement can also be done in a short period!

Derived from the manufacturing of tanks, we also produce shell and tube heat exchangers. We can manufacture small units under 1m² to medium-sized units around 300m². 【Types of Manufacturing】 ■ Fixed tube sheet heat exchangers: Used when the outside of the tubes is clean and less prone to scaling, or when scaling can be easily removed through chemical treatment. ■ U-tube heat exchangers: Allow for cleaning of the tube side by removing the U-tube bundle, and the tubes are free to expand thermally. ■ Kettle heat exchangers: Do not require a device to separate gas and liquid, and are suitable for low-pressure evaporators due to low water head pressure. ■ Floating head heat exchangers: A structure where one tube sheet is fixed to one end of the shell with a flange, allowing the other tube sheet to move within the shell. *For more details, please download the PDF or contact us.

Company：八洲化工機
Price：Other

Heat exchanger
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

CROSSFLO Multi-Tube Heat Exchanger for CIP Heater

The position of the collection tube is a heat exchanger designed to achieve high heat exchange efficiency.

The "CROSSFLO Multi-Tube Heat Exchanger" is a heater manufactured by the Italian company MBS, constructed with corrugated small-diameter pipes assembled into a tube and welded to a shell tube, featuring a completely gasket-free structure. The position of the assembled tubes is designed to achieve high heat exchange efficiency, and the shell is equipped with a standard expansion joint. Additionally, we also offer the "MIXFLO Tubular Heat Exchanger" for sanitary equipment processes. 【Features of the CROSSFLO Multi-Tube Heat Exchanger】 ■ The material of the wetted parts is standard AISI316 for the tube side and AISI304 for the shell side. ■ Other corrosion-resistant materials are available as options. ■ There are over 20 combinations of assembled tubes and shells based on specifications. ■ The length of the heat exchanger can be selected from 1m to 6m. ■ The position of the assembled tubes is designed to achieve high heat exchange efficiency. *For more details, please refer to the PDF document or feel free to contact us.

Company：ＢＳアドバンシス
Price：Other

Heat exchanger
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Strengths of Pressure Vessels & Heat Exchangers 2: Cost and Delivery Responsiveness

Delivery in as short as 3 days! Achieving short lead times and cost reduction through our unique production management system and thorough in-house manufacturing. No need for preparation of machines or sheet metal!

At KEI Corporation, all production can be done in-house. Our unique production management system facilitates the leveling of order quantities and labor management (response support), shortening lead times. Additionally, by building a highly efficient manufacturing line that combines consistent in-house production with human operators and automated machines, we have significantly increased productivity. This enables us to achieve short delivery times and cost reductions. 【Benefits of In-House Production】 ■ Reduction of defect risks ■ Retention of added value internally ■ Reduction of transportation costs ■ Response to short delivery times If you are looking for short delivery times, please feel free to contact us by phone or email.

Company：ケーイーコーポレーション本社
Price：Other

Heat exchanger
Stainless steel container
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Instruction Manual] Shell and Tube Heat Exchanger Floating Tube Sheet Type (Horizontal)

High performance and compact! Instruction manual for Kamui shell and tube heat exchangers.

This document is the instruction manual for the Kamui-made "Shell and Tube Heat Exchanger with Floating Head (Horizontal Type)." It includes features, the arrangement of components and baffles, fluid flow, causes of failure, and countermeasures. This product incorporates years of experience and boasts many features, making it widely used in various industrial fields as a heat exchanger, receiving positive feedback. [Contents] ■ Introduction ■ Features ■ Components ■ Arrangement of Baffles and Fluid Flow ■ Piping *For more details, please refer to the PDF document or feel free to contact us.

Company：神威産業
Price：Other

Heat exchanger
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

[Information] The Necessity of Maintenance for Heat Exchangers in Bathing Facilities

Avoid risks by performing proper maintenance! It also contributes to reducing energy costs.

In hot spring facilities, heat exchangers are important equipment related to maintaining the bathtub temperature for bathers, yet proper maintenance has not been conducted until now. As a result, there have been many cases where the temperature increase cannot keep up during operating hours, bathtub water leaks, and heat source water mixes into the bathtub. By conducting proper maintenance on heat exchangers, not only can risks be avoided and facilities operated safely, but it also contributes to reducing energy costs. The materials include issues with shell-and-tube heat exchangers, as well as issues with plate heat exchangers and responses by type of heat exchanger. [Contents] ■ Issues with shell-and-tube heat exchangers ■ Issues with plate heat exchangers ■ Responses by type of heat exchanger *For more details, please refer to the PDF document or feel free to contact us.

Company：大洋水研
Price：Other

Heat exchanger
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Heat recovery system through existing furnace modification [Case Study Introduction]

The existing furnace remains as it is, contributing to the reduction of fuel gas consumption and low carbonization!

By installing a heat exchanger in the existing paint drying oven and recovering the exhaust heat from the oven, the combustion air for the burner is preheated. The temperature difference from the preheating of the combustion air contributes to energy savings.

Company：正英製作所本社、東京支店、名古屋営業所、大阪支店、広島支店、九州支店
Price：Other

Industrial Furnace
Tube Heat Exchanger

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Bear tube type heat exchanger "Shell & Tube type heat exchanger"

Dust-laden gas passes through the steel pipe at high speed, preventing dust adhesion! High-temperature preheating is possible.

The "Shell & Tube Heat Exchanger" is a type of heat exchanger that arranges numerous steel tubes within a cylinder and passes heat source gas through these tubes. Baffle plates are provided to ensure that the preheated gas flows directly into the tubes. It is possible to prevent dust accumulation by passing considerably dusty gas (e.g., from sewage sludge treatment facilities) at high speed through the steel tubes. High-temperature preheating can be achieved with heat source gas temperatures of up to 850°C and preheated gas temperatures of up to 600°C. 【Features】 ■ By passing dusty gas (e.g., from sewage sludge treatment facilities) at high speed through the steel tubes, dust accumulation can be prevented. ■ High-temperature preheating is possible with heat source gas temperatures of up to 850°C and preheated gas temperatures of up to 600°C. ■ Self-supporting tower design requires minimal installation space. ■ Can also be used as a gas cooler by flowing cooling water outside the tubes. *For more details, please refer to the PDF document or feel free to contact us.

Company：サンキエンジニアリング
Price：Other

Heat exchanger
Other energy equipment
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

CHEMIARX Co., Ltd. "Business Overview"

We combine the resources of both Japan and China to offer high-quality products at low prices.

CHEMIARX Co., Ltd. aims to leverage its knowledge and experience to deepen the mutual relationship between Japan and China through business and contribute, even in a small way, to private friendly exchanges. 【Features】 ■ Combines resources from both Japan and China to provide high-quality products at low prices ■ Enhances overall satisfaction of QCDS. 　Q: Quality C: Cost D: Delivery S: Service 【Products】 ■ Multi-tube heat exchangers / Shell and tube heat exchangers ■ Atmospheric vessels & pressure vessels ■ Explosion-proof electric heaters *For more details, please refer to the PDF or feel free to contact us.

Company：CHEMIARX
Price：Other

Municipal services and business location
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tube-type heat exchanger series "NTR type (single pass type)"

Heat and cool without changing the taste or shape!

Our company offers a series of tube-type heat exchangers, the 'NTR type (single pass type)', which prevents contamination by eliminating gaps between the shell-side tube sheet and tubes, allowing products to flow on the shell side. By adopting small-diameter tubes, the flow velocity inside the tubes increases, achieving a high heat transfer coefficient. Furthermore, by using corrugated tubes, the heat transfer coefficient is improved. 【Features】 - Energy-saving: Reduces utility usage by performing liquid-liquid heat recovery. - Disassembly structure: Allows visual inspection of the outer surface of the tubes. - Space-saving: Conducts heat exchange without hot water, reducing installation space. - Floating tube sheet: Can absorb differences in thermal expansion without expansion bends. *For more details, please download the PDF or feel free to contact us.

Company：イズミフードマシナリ
Price：Other

Other Heat Exchangers
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Radiation panel

Radiant panel with high durability achieved by a polyethylene three-layer pipe with an aluminum core material.

Our company offers a radiant air conditioning system that balances comfort and energy efficiency, primarily featuring 'radiant panels' that absorb heat from the human body. By circulating water close to room temperature—20°C in summer and 26°C in winter—through a three-layer pipe made of resin and aluminum, we provide heating and cooling. The water temperature is efficiently transmitted to the radiant panels, allowing the entire panel to maintain a nearly uniform temperature, which creates a comfortable environment with minimal temperature differences. 【Features】 ■ A wide variety of designs ■ Reduced number of panels required with high-performance aluminum panels ■ High durability achieved with polyethylene three-layer pipes with aluminum core material ■ Equivalent weight to standard ceiling rock wool sound-absorbing boards ■ Installable by ceiling and piping contractors *For more details, please download the PDF or contact us.

Company：ササクラ水処理事業部
Price：Other

Other air conditioning equipment
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Parallel flow condenser

Stable cooling performance for air conditioning systems! We manufacture condensers in your desired size.

The "Parallel Flow Condenser" is a product that can condense and liquefy refrigerant gas by cooling it. Based on the know-how cultivated in our main business of manufacturing heat exchangers for vehicles, we produce condensers in the desired size using aluminum materials. The core size ranges from a thickness of 16 to 22 mm, a height of 200 to 900 mm, and a width of 124.6 to 349.6 mm. 【Model Numbers】 ■KPC159833 ■KPC220013 ■KPC250836 ■KPC253836 ■KPC259038 ■KPC290038 *For more details, please refer to the PDF document or feel free to contact us.

Company：コーヨーラド
Price：Other

air conditioning
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Fin tube heat exchanger for drying/cooling/dehumidifying

Design tailored to various needs such as thermal conductivity, environmental resistance, and weight reduction. Presentation of materials introducing basic knowledge and application scenarios of heat exchangers.

Heat exchangers are actively used in various applications such as heating, cooling, and drying of industrial products. However, selecting a heat exchanger that fits the equipment and machinery requires knowledge and experience. At Katsukawa Thermal Engineering, we have been providing heat exchangers that embody our customers' voices based on the experience and know-how accumulated over many years. We own a large number of dedicated machines for various types of finned tubes as part of our in-house facilities. We respond to requests by leveraging our high production capacity and the advantages of our industrial region. For inquiries about heat exchangers for manufacturing lines in sectors such as semiconductors, automotive, food, machinery, chemicals, pharmaceuticals, mining and manufacturing, paper, and pulp, please feel free to contact us. 【Products We Handle】 ■ LS finned tube heat exchangers ■ Ero finned tube heat exchangers ■ Plate finned tube heat exchangers *We are currently offering a document summarizing basic knowledge and applications of heat exchangers! You can view it via PDF download.

Company：勝川熱工営業部・工場
Price：Other

Heat exchanger
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Multi-tube heat exchanger Shell & tube heat exchanger

Compact design! Installation in-line is possible with a design tailored to your needs!

The multi-tube heat exchanger is primarily a heat exchanger that uses liquid-to-liquid media. It has a structure where numerous narrow heat transfer passages are arranged within a cylindrical body, allowing for heat exchange between fluids with different temperatures inside and outside the heat transfer tubes. The heat exchange between liquids using a multi-tube heat exchanger is systemically simple and results in the lowest total cost. In design and manufacturing, adjustments will be made to ensure a structure that can be easily integrated into existing equipment. 【Features】 ○ Achieves high-efficiency heat exchange ○ Compact design minimizes installation space ○ Can be installed in an inline configuration (both vertical and horizontal orientations are acceptable!) ○ Utilizes SUS304, 316L, and titanium for high corrosion resistance For more details, please contact us or download the catalog.

Company：勝川熱工営業部・工場
Price：Other

Heat exchanger
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

LS fin tube heat exchanger

Superior heat transfer efficiency compared to the Elophin type. Reduced number of pipes allows for space-saving and cost reduction.

In the heating and drying processes of industrial products, heaters using indirect heating with steam or thermal oil are employed. Our "LS Fin Tube Heat Exchanger" has been developed by considering both the advantages and disadvantages of the Erofin type and the plate fin type. <Features of Erofin Type> - Superior adhesion between fins and heat transfer tubes compared to plate fin type, but inferior in heat transfer area. - Arrangement and spacing between fin tubes are flexible. - A higher number of tubes and longer effective length lead to increased costs. <Features of Plate Fin Type> - Inferior adhesion between fins and heat transfer tubes compared to Erofin type, but allows for a larger heat transfer area. - Limited flexibility in the arrangement and spacing between fin tubes. - Difficult to clean and maintain. <Features of LS Fin Tube Type> - By wrapping the fins in an L-shape, the contact area with the heat transfer tubes is increased, improving heat transfer efficiency. - High heat transfer coefficient allows for a reduction in the number of tubes compared to Erofin type, leading to cost savings. - Arrangement and spacing between fin tubes can be freely determined, similar to Erofin type. - Longer effective length and a higher number of tubes make it more advantageous than plate fin type. *In addition to the product catalog, we are also providing basic knowledge materials on heat exchangers.

Company：勝川熱工営業部・工場
Price：Other

Heat exchanger
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

"Elfin Heater" <Basic Knowledge and Selection Guide for Heat Exchangers Available>

Efficiently heats gases, and cleaning and repairs are a breeze. We can propose custom specifications that perfectly match your needs.

We custom-manufacture "Elophin Heaters" for heating air (gas) incorporated into drying equipment, facilities, and air conditioning units. The fin tube, which has a metal plate wrapped around the heat transfer tube, exhibits high heat dissipation. It is widely used as a heat source for steam, hot water, and thermal oil, and is commonly adopted in steam coils for air conditioning systems, as well as in steam heaters for drying industrial products and warming cabinets. It is easy to clean and repair, making it suitable for process air conditioning in various manufacturing lines. We can provide proposals tailored to your specific usage needs. 【Features】 ■ Available in various fin materials such as SS, SUS, copper, and aluminum ■ Zinc plating, tin plating, and brazing processing are possible for fin tubes ■ We also accommodate the production of pipes and fins made from special metals ★ We are currently offering a "Basic Knowledge and Selection Guide for Heat Exchangers," which includes examples of applications in manufacturing lines. You can view it immediately by clicking the download button. Please feel free to contact us with any inquiries.

Company：勝川熱工営業部・工場
Price：Other

Heat exchanger
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Matsuzawa Manufacturing Co., Ltd. Business Introduction

We respond to the wish of "It would be great if..." with heat exchange technology and solve the problem of "I'm in trouble..."!

We support our customers' production lines with specialized cooling and heating equipment that utilizes various heat sources, from low to high temperatures. Since our establishment in 1961, we have developed various cooling and heating equipment and devices, with heat exchange design and manufacturing technology at our core. By honing our "technical capabilities," "proposal capabilities," and "quality capabilities," and pursuing "speed," our products are now active in a wide range of fields, including automotive, textiles, food, and commercial facilities. Additionally, by consistently handling everything from the development and design of cooling equipment to repairs, we create products that enhance added value and quality. 【Business Activities】 ■ Design, manufacture, and sales of heat exchangers, air conditioning units, dryers, coolers, testing equipment, etc. ■ Design and construction repair of associated piping systems ～～Rich Product Lineup～～〇 Fin tube heat exchangers ［Drying, heating, preheating］・Elofin heaters ・Plate fin heaters ［Cooling, refrigeration, freezing］・Plate fin coolers 〇 Shell and tube heat exchangers 〇 Air conditioning units 〇 Testing equipment and units Others *For more details, please contact us or download the catalog.

Company：松澤製作所
Price：Other

Heat exchanger
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

U-tube type heat exchanger "US type"

Hot water heating by steam. U-tube type heat exchanger made of stainless steel U-tubes.

The U-tube type heat exchanger "US type" uses stainless steel U-tubes for the heat transfer tubes, allowing for a compact design of the heat exchanger body, making it usable outside the pressure vessel application range. It is ideal for hot water heating with steam, hot water supply systems, and heating/cooling of hot spring water. For more details, please contact us.

Company：藤産業
Price：Other

Heat exchanger
Tube Heat Exchanger

View product details

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Shell and tube heat exchanger

A heat exchanger boasting excellent corrosion resistance and thermal conductivity! We can provide materials that meet your requirements.

The "Shell Tube Heat Exchanger" is a product that offers a wide range of capacities and sizes to suit most heating and cooling processes. It is designed as a single-pass counterflow type and is made from fluororesin with excellent corrosion resistance. The tube bundle is made of FEP, PFA, UHP-PFA tubes, and our proprietary high thermal conductivity Q-tubes, while the shell can be provided in various materials to meet your requirements. 【Features】 ■ High heat transfer coefficient ■ Outstanding corrosion resistance ■ Special sealing structure ■ Available in various materials to meet your requirements *For more details, please refer to the PDF document or feel free to contact us.

Company：カンセツ産業
Price：Other

Heat exchanger
Tube Heat Exchanger

Added to bookmarks

Bookmarks list

Bookmark has been removed

Bookmarks list

You can't add any more bookmarks

By registering as a member, you can increase the number of bookmarks you can save and organize them with labels.

Free membership registration

Tube Heat Exchanger Product List and Ranking from 29 Manufacturers, Suppliers and Companies | IPROS GMS

Tube Heat Exchanger Manufacturer, Suppliers and Company Rankings

Tube Heat Exchanger Product ranking